Design-to-Prototype (D2P) Lab

High-resolution 3D printer from 3dsystems "ProJet 3500HDMax" 

• Construction space: 298mm x 185mm x 203mm
• Resolution: 750dpi x 750dpi x 1600dpi
• Accuracy: 25µm (per 25,4mm component dimension)
• Layer thickness: 16µm - 32µm
• Material: VisiJet® Crystal

High-resolution electrohydrodynamic (EHD) printing system (in-house development)

• Printing of filigree structures in the µm range (drop-on-demand and continuous jet)
• Processing of rigid, flexible and stretchable substrates (e.g. Si, PET, TPU)
• Printing of dielectric and conductive media
  

Thermoforming system (in-house development)

• Forming of thermoplastic materials
• Application in 3D electronics

Scanning electron microscope TESCAN "VEGA II"

• Topography analysis of samples using SE detector
• Material contrast analysis of samples using a BSE detector
• Analysis of the elemental composition of samples using an EDX detector

Digital microscope from Keyence "VHX2000"

• Magnification range: 20 - 200x
• Possibility of 3D measurement

Laminar Flow Box Spetec FBS 56 SUper Silent

• Dimensions (inside in mm): 950 x 940 x 645
• ISO class 5

Vacuum chamber from Pfeiffer Vacuum

• Chamber dimensions: 50cm x 50cm x 50cm
• Pressure range: 3Pa - 1atm
• Automated pressure control via LabView

Vibration control system from Spektra "SE-10"

• Excitation types: sine, noise, arbitrary signals
• Frequency range: 3Hz - 10kHz
• Accelerations: <60g
• Max. travel: 10mm
• Test specimen mass: <500g